Subject: Re: [vserver] how to use more than one IP in the same interface in guest with new config
From: Guenther Fuchs <vserver@muh.at>
Date: Mon, 3 Mar 2008 11:46:10 +0100

 Mon, 3 Mar 2008 11:46:10 +0100
Hi there,

on Monday, March 3, 2008 at 9:34:31 AM there was posted:

BG> If you did want to create a eth0:0 then two things are necessary,
BG> firstly you need to make sure there is a eth0:0 on the host
BG> machine,

Based on your value:

BG> /etc/vservers/example/interfaces/0/dev = eth0
BG> /etc/vservers/example/interfaces/0/name = 0

it is definately  not  necessary to have this set up on the host to
have an "eth0:0" if, no. The "dev" with "eth0" and "name" with "0"
leads already to the creation on guest start, so there's no need for
an extra setup on the host beside the vserver config files.

-- 
regards 'n greez,

Guenther Fuchs
(aka "muh" and "powerfox")