Subject: Re: [vserver] Guest - problem on networking and exit
From: Chuck <chuck@sbbsnet.net>
Date: Thu, 28 Aug 2008 06:17:19 -0400

On Thursday 28 August 2008, Stephen Liu wrote:
> 
> --- Chuck <chuck@sbbsnet.net> wrote:
> 
> - snip -
> 
> 
> > forgot.. typically during the vserver install the --interface
> > argument takes 
> > the form of  --interface eth0:192.168.1.25/24 and that's all it needs
> > to get 
> > it right. it must have the /cidr portion or your network interface
> > will not 
> > work correctly. nothing is assumed. the network code works out the
> > gateway 
> > and broadcast from the cidr and the host network setup.
> 
> 
> Referring to the notes taken down during installation;
> 
> --interface eth0:192.168.1.110
> 
> I left out /24 and entering the IP of the Host.  I suppose the Guest
> will take 192.168.1.111
> 
> 
> Anything I can do to correct it?  TIA
> 

enter those files mentioned in my last msg in the interfaces/0 directory and 
it should work fine. don't forget to edit the etc/host file inside the guest 
before starting it to set it to show the ip and name of the guest and, in my 
case i set the localhost to the same ip 


> 
> B.R.
> Stephen
> 
> 
> Send instant messages to your online friends http://uk.messenger.yahoo.com 
> 



-- 

Chuck