Subject: Re: [vserver] Guest - problem on networking and exit
From: Stephen Liu <satimis@yahoo.com>
Date: Thu, 28 Aug 2008 12:46:00 +0800 (CST)

Hi Chuck,


Thanks for your advice.


--- Chuck <chuck@sbbsnet.net> wrote:

- snip -


> typically the install wants a /24 rather than the entire netmask of 
> 255.255.255.0.   simply create the txt file called prefix and place
> as the 
> first 2 characters the number 24 and save it

I'll do it later.


> look at the entire /0 directory and be sure you have an ip file with
> the 
> correct ip in it and nothing else, and a dev file with your ethx. you
> can 
> optionally add a name file with up to 4 or 5 chars uniquely
> identifying this 
> interface, such as vs1 and then when you do an ip listing you will
> see if you 
> use eth0, eth0:vs1  and then the rest of the report.


# vserver vserver1 exec nano /etc/vservers/vserver1/interfaces/0/ip
Only an empty file


What shall I enter on this file.   TIA


I have only one NIC.  On the Host it is denoted as eth0


B.R.
Stephen L

Send instant messages to your online friends http://uk.messenger.yahoo.com