Subject: some questions of naddress
From: songjun435 <songjun435@gmail.com>
Date: Wed, 14 Mar 2012 21:38:32 +0800
Wed, 14 Mar 2012 21:38:32 +0800
hi,all:
I use naddress command to add ip to the vps

1. I have started a test vps with "--interface eth0:192.168.155.50/24",and I enter the
test vps,execute ifconfig:
eth0      Link encap:Ethernet  HWaddr 78:2B:CB:02:2C:18  
          inet addr:192.168.155.50  Bcast:192.168.155.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:271309 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58440 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:124534819 (118.7 MiB)  TX bytes:5267316 (5.0 MiB)
          Interrupt:98 Memory:d6000000-d6012800 

2. then I execute "naddress --set  --nid 42 --ip 10.0.0.3/24",information on the console:
Adding 10.0.0.3
3.then I enter the test vps again,and execute ifconfig,
   But now there is nothing output to the console,why?

Can I use the naddress to change the ip of the vps?
And how to give two or more ips to the vps?
Thank you!



3NMedia

hi,all:
I use naddress command to add ip to the vps
 
1. I have started a test vps with "--interface eth0:192.168.155.50/24",and I enter the test vps,execute ifconfig:
eth0      Link encap:Ethernet  HWaddr 78:2B:CB:02:2C:18  
          inet addr:192.168.155.50  Bcast:192.168.155.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:271309 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58440 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:124534819 (118.7 MiB)  TX bytes:5267316 (5.0 MiB)
          Interrupt:98 Memory:d6000000-d6012800 
 
2. then I execute "naddress --set  --nid 42 --ip 10.0.0.3/24",information on the console:
Adding 10.0.0.3
3.then I enter the test vps again,and execute ifconfig,
   But now there is nothing output to the console,why?
 
Can I use the naddress to change the ip of the vps?
And how to give two or more ips to the vps?
Thank you!

3NMedia
Ëξü