Hello I have now upgaded(new installed) a sytem to Centos 5.564bit with a new Kernel. Kernel now from [dhozac-vserver] via RPM. have mouted 2 HDD in the host filesystem and then bind intothe guest. It runs very good but the one hdd changes without doingsomthing to read only in the hostsystem and so allso in the guest. I have searched if anything have changed in the howto but itseems to be done ok. Have anyone an Idee??? more infos about the system see below. Many Thanks Roman Ott01 ~ $ /home/testme.sh Linux-VServer Test [V0.17] Copyright (C) 2003-2006 H.Poetzl chcontext is working. chbind is working. Linux 2.6.22.19-vs2.3.0.34.1 #1 SMP Mon Mar 17 02:33:42 EDT2008 x86_64 Ea 0.30.216 236/glibc (DSa)<v13,net,v21,v22,v23,netv2> VCI: 0002:0302 236 13010fb1 (KtTbsPHIWD) --- [000]# succeeded. [001]# succeeded. [011]# succeeded. [031]# succeeded. [101]# succeeded. [102]# succeeded. [201]# succeeded. [202]# succeeded. /etc/fstab: LABEL=/ / ext3 defaults 1 1 LABEL=/usr /usr ext3 defaults 1 2 LABEL=/vmware1 /vmware ext3 defaults 1 2 LABEL=/var /var ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 LABEL=SWAP-sda6 swap swap defaults 0 0 /dev/sda7 /vservers ext3 defaults 0 0 /dev/sdc5 /data/storage/750Gb_1 ext3 grpquota,usrquota 0 0 /dev/sdb5 /data/storage/1000Gb_1 ext3 defaults 0 0 /etc/vservers/file/fstab. none /proc proc defaults 0 0 #none /tmp tmpfs size=16m,mode=1777 0 0 none /dev/pts devpts gid=5,mode=620 0 0 #/data/storage/160GB_1 /data/storage/160GB_1 bind bind,rw 00 #/data/storage/120GB_1 /data/storage/120GB_1 bind bind,rw 00 /data/storage/750Gb_1 /data/storage/750Gb_1 bind bind,rw 0 0 /data/storage/1000Gb_1 /data/storage/1000Gb_1 bind bind,rw 00
Hello
I have now upgaded(new installed) a sytem to Centos 5.5
64bit with a new Kernel.
Kernel now from [dhozac-vserver] via RPM.
have mouted 2 HDD in the host filesystem and then bind into
the guest.
It runs very good but the one hdd changes without doing
somthing to read only in the hostsystem and so allso in the guest.
I have searched if anything have changed in the howto but it
seems to be done ok.
Have anyone an Idee???
more infos about the system see below.
Many Thanks
Roman
Ott01 ~ $ /home/testme.sh
Linux-VServer Test [V0.17] Copyright (C) 2003-2006 H.Poetzl
chcontext is working.
chbind is working.
Linux 2.6.22.19-vs2.3.0.34.1 #1 SMP Mon Mar 17 02:33:42 EDT
2008 x86 64
Ea 0.30.216 236/glibc (DSa)
<v13,net,v21,v22,v23,netv2>
VCI: 0002:0302 236 13010fb1 (KtTbsPHIWD)
---
[000]# succeeded.
[001]# succeeded.
[011]# succeeded.
[031]# succeeded.
[101]# succeeded.
[102]# succeeded.
[201]# succeeded.
[202]# succeeded.
/etc/fstab:
LABEL=/
/
ext3 defaults 1 1
LABEL=/usr
/usr
ext3 defaults
1 2
LABEL=/vmware1
/vmware
ext3 defaults 1 2
LABEL=/var
/var
ext3 defaults 1 2
LABEL=/boot
/boot
ext3 defaults 1 2
tmpfs
/dev/shm
tmpfs defaults 0 0
devpts
/dev/pts
devpts gid=5,mode=620 0 0
sysfs
/sys
sysfs defaults 0 0
proc
/proc
proc defaults 0 0
LABEL=SWAP-sda6
swap
swap defaults 0 0
/dev/sda7 /vservers ext3 defaults
0 0
/dev/sdc5 /data/storage/750Gb 1 ext3
grpquota,usrquota 0 0
/dev/sdb5 /data/storage/1000Gb 1 ext3
defaults 0 0
/etc/vservers/file/fstab.
none
/proc
proc
defaults
0 0
#none /tmp
tmpfs size=16m,mode=1777 0 0
none
/dev/pts
devpts
gid=5,mode=620
0 0
#/data/storage/160GB 1 /data/storage/160GB 1 bind bind,rw 0
0
#/data/storage/120GB 1 /data/storage/120GB 1 bind bind,rw 0
0
/data/storage/750Gb 1 /data/storage/750Gb 1 bind bind,rw 0 0
/data/storage/1000Gb 1 /data/storage/1000Gb 1 bind bind,rw 0
0