-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Herbert, All, I tried a lot but I cant get this to work - anybody can give me some hints on that issue? Oliver Herbert Poetzl schrieb: > On Tue, Sep 16, 2008 at 11:50:19PM +0200, Oliver Welter wrote: > Hi György > > PÁSZTOR György schrieb: >>>> Hi! >>>> >>>> "Oliver Welter" <mail@oliwel.de> írta 2008-09-13 13:40-kor: >>>>>> This is what you want. There's no such thing as "imported to guest", if >>>>>> you set this up right, things will work. >>>>> So, how do I "set this up right" >>>> Have you read the tutorial at lartc.org? >>>> If you have read and understood this: >>>> http://lartc.org/howto/lartc.rpdb.multiple-links.html#AEN268 >>>> than quote your routing tables and route policy here, to let us see where >>>> the problem is. (If still there is) > My Setup is similar to this, but its not doing fpr the reasons I gave in > this post. But here is my config, the .99 IPs are the ones from the > testing guest. > > ~# ip addr > 1: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000 > link/ether 00:40:d0:c0:18:cf brd ff:ff:ff:ff:ff:ff > 2: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000 > link/ether 00:40:d0:c0:18:d0 brd ff:ff:ff:ff:ff:ff > inet 192.168.200.9/24 brd 192.168.200.255 scope global eth1 > inet 192.168.200.99/24 brd 192.168.200.255 scope global secondary eth1 > 3: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > 4: vlan3@eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue > link/ether 00:40:d0:c0:18:cf brd ff:ff:ff:ff:ff:ff > inet 82.135.58.9/25 brd 82.135.58.127 scope global vlan3 > inet 82.135.58.99/25 brd 82.135.58.127 scope global secondary vlan3 > 5: vlan4@eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue > link/ether 00:40:d0:c0:18:cf brd ff:ff:ff:ff:ff:ff > inet 212.18.24.209/26 brd 212.18.24.255 scope global vlan4 > > ~# ip rule > 0: from all lookup 255 > 32764: from 212.18.24.192/26 lookup 104 > 32765: from 82.135.58.0/25 lookup 103 > 32766: from all lookup main > 32767: from all lookup default > > ~# ip route list table 103 > 82.135.58.0/25 dev vlan3 scope link > default via 82.135.58.1 dev vlan3 > >> if your guest has an ip in 192.168.200.0/24 too, then >> you either want to have an entry like this > >> 192.168.200.0/24 dev eth1 scope link > >> here too, or block packets to the 192.168.200.0/24 >> addresses or handle the fact that the wrong src ip >> is used ... in any case, an explicit 'src xxx' is >> advised on all network entries > ~# ip route list table 104 > 212.18.24.192/26 dev vlan4 scope link > default via 212.18.24.193 dev vlan4 > >> same here > >> HTH, >> Herbert > > ~# ip route list table main > 212.18.24.192/26 dev vlan4 proto kernel scope link src 212.18.24.209 > 82.135.58.0/25 dev vlan3 proto kernel scope link src 82.135.58.9 > 192.168.200.0/24 dev eth1 scope link > default via 212.18.24.193 dev vlan4 > > Oliver - -- Protect your environment - close windows and adopt a penguin! PGP-Key: 3B2C 8095 A7DF 8BB5 2CFF 8168 CAB7 B0DD 3985 1721 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFI3PeOyrew3TmFFyERAlMSAJwNYJKf3O+7ewx50Umt7O4zj8dArgCfUdUk CMG0/3L7ilrUYnCNvqPZS14= =BZIH -----END PGP SIGNATURE-----