--- Jason Drage <jasond@ibsglobalweb.com> wrote: > > # vserver vserver1 exec nano /etc/vservers/vserver1/interfaces/0/ip > > Only an empty file > > > > > > What shall I enter on this file. TIA > Sorry, I mean on the host edit the file eg; > # nano /etc/vservers/vserver1/interfaces/0/ip > > It's contents should just be the ip address you want > > > I don't know why you'd want to do this :) > # vserver vserver1 exec nano /etc/vservers/vserver1/interfaces/0/ip Hi Jason, Sorry I made a mistake previously doing those steps on the Guest. On the Host; =========== [Host]# nano /etc/vservers/vserver1/interfaces/0/ip changing 192.168.0.110 to 192.168.0.111 [Host]# nano /etc/vservers/vserver1/interfaces/0/prefix entering; 24 there. # vserver vserver1 start Starting enhanced syslogd: rsyslogd. Starting periodic command scheduler: crond. # vserver vserver1 exec ifconfig eth0 Link encap:Ethernet HWaddr 00:0e:a6:f9:a3:5b inet addr:192.168.0.111 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2435 errors:0 dropped:0 overruns:0 frame:0 TX packets:2282 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2240299 (2.1 MiB) TX bytes:412785 (403.1 KiB) Interrupt:50 Base address:0xe000 server1:/home/satimis# vserver vserver1 exec ping -c3 yahoo.com PING yahoo.com (206.190.60.37) 56(84) bytes of data. 64 bytes from w2.rc.vip.re4.yahoo.com (206.190.60.37): icmp_seq=1 ttl=51 time=304 ms 64 bytes from w2.rc.vip.re4.yahoo.com (206.190.60.37): icmp_seq=2 ttl=51 time=299 ms 64 bytes from w2.rc.vip.re4.yahoo.com (206.190.60.37): icmp_seq=3 ttl=51 time=297 ms --- yahoo.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 297.220/300.500/304.843/3.201 ms Thanks B.R. Stephen Send instant messages to your online friends http://uk.messenger.yahoo.com